I’ve been working on installing a washdown pump for about a month now. I’ve been thinking about it for a couple of years. I tried using a DC pump that I just lowered over the side, and it was sort of okay but not really convenient, as it took a long run of wires to power it.

After online research on message boards and equipment, and getting advice from Kurt, I finally ordered the materials (pump and hose) I’d need to install a washdown pump, using the intake line to my boat toilet (aka, head) for the water intake. I’d seen this as a viable option on boat message boards, as it meant you didn’t have to put a new hole in your boat for a through-hull fitting.

The first thing I did was get Dorothy to help me. I needed a skinny body to drop down into my engine room and feed the 1/2-inch hose from the rear of the boat through the engine room and up to the bathroom, where the 3/4-inch line leading to the head was available for splicing into. We completed this task and some other little things in an hour, and that got her lunch at McDonald’s and twenty bucks from Uncle Mark.

The 3/4-inch line coming up from the through-hull fitting ran under the bathroom sink counter, and that’s where I figured I could splice into it with a 3/4-inch to 1/2-inch tee to divert water to the pump via a 1/2-inch line. Under the counter was also a convenient, accessible, and out-of-the-way location to mount the pump. On my hands and knees, I could look through the cabinet doors under the sink and see the intake line about 3 feet away under the sink counter along the starboard hull. I could also see the line from above when I took out the counter drawer, which was right over it. But I had my doubts about actually getting to the hose in the narrow area under the sink counter or the narrow drawer opening. How would I get enough leverage to cut the hose and then install the tee hose barbs in such a tight space? I could barely squeeze my shoulders in there to reach it from the side and could only reach one arm through the drawer opening to reach it from above. I even asked Bob about neatly cutting an access panel through the top of the bathroom cabinet that I could reinstall without it looking butchered.

As I sat there wondering just how I was going to do all this, I saw it: the hose line coming up to the manual head pump was right there in front of me in plain sight! All I had to do was loosen the hose clamp and hope it would pull down from the pump intake nipple, which it did surprisingly easily! From there, I just pushed the hose down a bit and put the tee in the end! I walked up to Harri’s for a little piece of 3/4” hose to connect from the other side of the tee back to the intake nipple. I was in business.

I drilled a hole through the cabinet. Then I fed a piece of the 1/2-inch hose from the tee through the cabinet wall and clamped it to the fitting on the intake side of the pump. Then, I clamped the hose coming in from the engine room to the outflow side of the pump. Finally, I bolted the pump in place to the inside of the cabinet wall. That part was done.

Now for the other end of the hose on the back deck. There are two teak steps attached to the back wall that are for climbing up onto the roof of the salon area. Under one of the steps, I had installed the outlet for the freezer on the back deck last year. I decided to install the spigot under the other step. First, I had to run the hose through the salon cabinetry, then under the bench seating around the salon table, which didn’t require any drilling as there was ample space in holes where other lines were already installed. I drilled a hole under the step from the outside wall, then fed the hose from the salon out the hole and clamped it to a fitting that would connect it to the hose bib I mounted under the step. I used a continuous piece of hose from the outlet of the pump all the way to the outside of the back wall, so the only place the system could leak inside the boat was at the fittings on the pump under the bathroom sink—short of the hose line itself springing a leak, which is unlikely. After I hooked up the hose to the spigot, I went back inside and neatly secured the hose with hanger straps down the inside wall of the salon and under the benches so it was out of the way.

Lastly came the wiring of the pump. I considered several different circuits on the boat to run the pump through, as I didn’t want a direct connection to the battery but rather wanted it to run through the fuse panel. Then, again, I saw it—there’s a light on the ceiling of the bathroom! I’d never noticed it before. I threw the switch on for the lights in the forward berths, and flicked the switch on and off on the bathroom light. Nothing happened. I then removed the light’s globe glass and dropped the fixture down. I tested the wires with the battery meter. Bingo. 12.3 volts. When I removed the bulb, I could see it was cloudy and likely no good.

My final problem was where to put in a switch for the pump. Most DC switches nowadays are made for the very thin walls of aluminum or console board, not for thicker cabinet walls. I had no switches with long enough necks to go through the wall, and in fact had had this same issue when I installed a wiper switch. I knew these long neck switches were not available in town. I had an appointment approaching in mid-afternoon, so I quit for the day about halfway through the wiring.

On the way home, I had my final epiphany: just install another switch on the housing for the light! The light housing is a thin piece of metal, and this made things very simple. I put in the extra switch, then put in a new bulb and got the light working. After I installed the second switch, I tested it with the voltmeter until I had the wiring to the right leads on the switch, then remounted the light fixture back in place. I’d drilled a hole in the side of the light fixture mount to feed in the sheathed wiring. The wiring sheath is white and matched the white color of the bathroom walls nicely. I used white plastic wiring staples to neatly secure the wire from the light fixture along the ceiling, then down the wall through another hole drilled through the counter and down to the pump.

I connected the wiring to the pump, walked outside to open the spigot valve, and threw the switch at the light fixture. I could hear the pump working and thought I heard something outside, but I could not see any water coming up the clear hose from the tee to the pump in front of me. I thought the outside noise was just air moving through the system. I tried jiggling the toilet valve to be sure it was closed and that I wasn’t sucking air, and felt around the pump fittings, but could not feel any air or water leaks. Finally, I went out to the spigot, and it was gushing water. I couldn’t see the water moving through the hose, but it was moving alright! I finished my last task of the project by securing the wiring under the counter so it would be out of the way, and that was it! Now for cleanup and putting things away, which I’ll spread out over today and tomorrow.

A satisfying last major project I wanted done on the boat for now to make it how I want it. The washdown pump will replace the back-breaking chore of throwing over a 6-gallon bucket over the side to get water to clean fish or clean the deck, and make cleaning fish a lot easier and thorough.

I plan to spend most of the summer down in Craig, so it’s time to get my firewood in for the season so I have it done before I go. I cut down a big ass tree two years ago about 50 yards from our woodshed, and decided that would be my mission this season for firewood.

I got out the big boy saw, Stihl 041, that I bought from Ron when he left town. Bob sharpened the several chains I have for it. I filled the gas and oil, and as usual, after about 3 pulls, the saw fired up.

The tree spanned our little creek, and the part that was over the ground was held off the ground by its branches. I wasn’t sure how I was going to buck the whole thing, as the butt section spanned the creek and was about 7 feet above the creek bed. I started at the middle section of the tree, which was supported by a little berm on the butt end, and by numerous branches holding it up off the ground to the tree top. I used a 16 inch piece of ruler to mark the cut spots with chalk. I limbed and bucked rounds over the next 2 days, limiting my cutting day to one tank of gas. I’m not in a hurry and think doing a little a day will limit saw vibration injury to my arms.

The last two days, I was cutting the butt end that spanned the creek. I didn’t have a plan as how to safely do it, so I just cut from each end until all that was left was the section that spanned the creek. I knew I wanted to somehow get the section down onto the creek bed so it was on the ground. I was able to roll it a half turn with the peevee, but not all the way off the bank and into the creek. Then I saw it had rolled onto a root wad sticking up from the creek not far from one bank. That allowed me to cut some rounds from that bank to the root wad without pinching the saw. I was able to cut the root where the remaining log was held up, then roll it off the root and down into the creek bed. Perfect. I bucked up the section in the creek. Now I had the tree all bucked up into rounds, in addition to some other small logs I cut that I’d pulled down the hill last year.

On day 5, I got started splitting. I began with the wood in the creek bed. The butt ends were maybe 2.5 to 3 feet diameter, and split easily with the maul since they had few knots. I had to lob the pieces up from the creek to the garage side of the creek. I will have to split the pieces again that won’t fit in the stove, and then haul them down to the woodshed. The lobbing motion from the stream bed seemed similar to snow shoveling, and that was the special tonic for my hip, so all the work was feeling like physical therapy as much as work.

On day 8, I’d split all of the bigger rounds, and chucked the pieces across the creek. I stopped splitting for now and would see if what I’d cut would fill the woodshed. I’d leave the rest of the rounds for next year if it did.

The next 3 days I hauled the wood in a Rubbermaid cart Bob and I found on the beach years ago when we went hooter hunting across from the cabin. It hauls a lot of wood and is easy to move with the big wheels. Today I finished the last load, probably about the 20th or so wheelbarrow load, with a few pieces of wood thrown across the creek still there, and many rounds still on the other side of the creek. So a head start on next year. I have to say this was more work than enjoyment this year, but the satisfaction was still there when the job was done. I’m calling this 64 wood, as it’ll be 4 years till I burn this wood, and I’ll be 64 then, if I make it.

Arrived in Bethel for my annual moose hunt. Doug had texted me on Saturday. He said weather looks good to go soon, so come out Monday or Tuesday. I got mileage tickets for Monday, and started packing.

After going out several times, I knew what I needed – parka and snow pants. Long underwear and some cotton and polypro turtlenecks. Caribou pack boots. Fleece face mask and fur trapper hat. Underwear and socks. Rifle and shells. Ready to go.

I arrived mid-day. Doug said it was like I never left. Val got down the air mattress, removed her sewing machine and quilt table, and set my bed up in her sewing room. We put the crab I bought when I was in Craig into the freezer, along with some halibut from last summer. Then we sat down and drank coffee and got caught up.

Two of their good friends, who themselves were best friends – a thirty something Malaysian woman doctor and a thirty something woman from Tuntatuliak – came over for crab dinner that night. I steamed the crab. It was the only cooking I was allowed to do all week.

Pat called and said Wednesday was the day. So we got things ready to go on Tuesday. I helped Doug figure out how to add some coolant to his brand new machine. We had to take the reservoir off to get to it. Doug made musk ox roast for dinner. A real Bethel treat.

We met the others at 6 am the next morning. Pat’s buddy from Palmer and his 9 year old son were on one snow go. Pat, Louise, Val, Doug and I were each on our own. So 6 machines in all. We headed north to the Yukon in the dark. The trail was very rough. Adequate snow cover, but many berms had blown across the trail from the wind. You could see them only from the shadow they made in your headlight. It was hard to tell their size in the dark. I am already a slow snow machine rider, and this slowed me down even more.

Dawn was about 730, and it was ahead and off to right of our center heading north. Blazing red orange skyline. Stunning.

When the sun got up over the horizon, it made travel  a little better, as the berms were easier to see coming. I was 5th in line, with Val in front of me and Doug bringing up the rear for security.  The other three were many times out of my sight. Val was in and out of sight.

When we were almost to the Yukon River, I’d lost sight of Val. We dropped down to a slough about 200 yards long that led to the river. About half way down the slough, the trail split around a small line of trees – one trail to the left and one to the right. I judged the track on the right trail was fresher, so I took it. It led me through a small line of trees, then down the bank and I was on the frozen Yukon.

When I dropped down, I saw a snowmobile racing away with a sled behind, apparently from the left track trail. I was a bit confused, as Val and I had no sleds. I sped to catch up, then the rider turned and came back. It was Louise. She said she thought she saw Val waving on the bank. Doug caught up to us, and we headed back.

Val was, indeed, waving from the bank. Where the trail split and I took the right track, the first 4 riders had gone left. Where the slough choked down to a narrow trail that led to the river, there was overflow. This is were water bleeds above the hard river ice, and in this case, it semi froze again, with a layer of ice over the water, and snow on top of the ice. The first 3 riders had sped across and made it fine, but had broke through the overflow ice. When Val followed, even though she had seen the overflow and had “floored it”, one of her skis got below the overflow ice layer and stopped her. Then her machine sunk a couple feet in the overflow water til it settled on the hard ice below that. The water came up to her foot rails. She was able to walk across the overflow ice to the bank and not get wet. When she walked out to the main river, she went through a few spots in the snow along the bank to water that over her boots and got just a little wet. But she was okay.

Doug, Louise and I walked over to see the sled in the water, then returned to our machines and went around the way Doug and I had gone and got on the bank above Val’s sled. Doug and Louise got out their rope alongs (come alongs that use rope instead of wire). Doug chopped around Val’s sled to get her sunk ski free, then got one end of the rope tied to Val’s sled and the other end tied to my sled on top of the bank.  I cranked and cranked on the lever and eventually we got the sled up out of the hole of water. Then I tied the rope to the back of my sled and sped off a short distance and pulled Val’s sled up the bank. Her sled started right up, and after an hour or so from when she went in, we were back in business. It was now a sunny, beautiful lower Yukon River day in the high 20’s.

The willow islands were not far away, and we soon found Pat butchering a moose. His friend’s son had shot his first moose, and they had seen over a dozen others. Louise and Val went one direction, and Doug and I in the other, looking for moose. This was my fourth trip to this hunting spot. I’d got at least one moose every time, and I figured it was again, just a matter of time before we’d see moose. Yet we didn’t see any.  Pat sent us off to where I’d caught a moose last year. When we were about to get to that trail, we saw the girls heading that way already, so we doubled back along the Yukon side of the island, and then started back up and onto the same island again. We’d passed a narly spot without incident the first time through, but when I tried to cut through the spot this time, I got caught up in it and tipped over onto the snow onto my back, with the snow go sunk and tipped at a 45 degree angle. I put my feet onto the sled to push it back upright, thinking this was a simple spill. When I pushed against the sled, I sunk through the snow and into a couple feet of water. Although we were on top of island, we had an “overflow” situation, with a layer of water covered over with a thin layer of ice with snow on top. I tried to get myself upright, and the harder I tried, the more I wallowed. I was on my back, and couldn’t get my feet under me and wasn’t able to grab my sled or a willow to pull myself up off my back. I was turtled. My gun on it’s sling on my back in the slush wasn’t helping, either. Doug tried to help me in my flailing, but he had no where to go and not get wet, either. I was wet up to my elbows and knees and some of my back when I finally got one hand on the snow machine handle, another on a willow, and pulled myself up so I could stand. But I was standing in water up to my knees, which flooded my pack boots. The felt liners wicked up the water like a sponge. Now I was worried about frostbite. I tried to get to dry ground, but every step was another post hole into the water. I was feeling all of 60 years old now. But adrenaline is a magic tonic. Although wet, I knew I had to get out of the water. I kept post holing until I finally got up on Doug’s sled, as Doug had climbed over to my sled when he was trying to help me get out of the water. Doug weighs alot less than I do, and he wasn’t breaking through, so he didn’t get wet.

He threw me over my back pack from the box on the back of my sled. I knew I had dry socks in the pack, but how was I going to keep my feet from freezing in the wet felt liners of the pack boots on the 4 hour ride home. Then I saw it: the hand and toe warmers Val had made me throw in my pack when we were packing for the trip!  I’d forgotten all about them. We found some plastic bags between us. I put on the dry socks, put the plastic bags over my socks, then put several activated warmer packs in each bag around my foot.

I slipped my feet back into the wet boots, and hoped for the best. Shit, I didn’t want to freeze my feet. We got my sled out by rope alonging it out with Doug’s sled as an anchor, then got back together with the others. Everyone was ready to go home, it seemed. No one had seen any more moose. I wasn’t sure if it was for me or not, but I didn’t have a choice- I needed to get going.

We headed back in the wonderful sunshine. I kept wiggling my toes every minute. At first they seemed to be getting colder. But an hour into the trip, I realized the warmers were kicking in. I was gonna make it, I thought.

We traveled back in the same formation as we’d come over. The front runners would wait for us bringing up the rear every hour or so, but as soon as we caught up, it seemed like everyone was eager to get home and we didn’t dally long. I was worried the warmers would wear off, and so kept monitoring the feeling and comfort of my feet.

It was a bigger relief than normal to see the windmill of Bethel and know we were close to home. When we got to the house, Val directed me to get right into the shower. Best shower ever.

Warm now, and refreshed, we went over to Pat and Louise’s for dinner. They had a feast of moose burgers, moose hot dogs, and best of all, my first taste of fresh moose heart from the day’s harvest. The moose heart was like the finest beef. Oh, it was good. I will not forget to take the heart if I get another moose.  With bellies full, it was the end of what they said is now called a “Type 2 Fun” day. No, I didn’t get a moose for the first time, but had an eventful day and learned to be better prepared for the next time we go.

Pat mentioned at dinner that the only realistic day to go according to the weather forecast was the next day. I knew in my mind that if Doug said we were going, I would go and gut it out. But I also knew I wasn’t going to encourage the notion. Crap, that trail was rough and I was not looking forward to another 8 hours on it, moose or no moose. When we got back to Doug and Val’s, as soon as Doug remarked that he wasn’t really sure he would be ready to turn around and go at 6 am the next morning, I couldn’t second the opinion fast enough, and both of us sort of let out a collective sigh of relief.  Doug knew even though I might not get another day to go over hunting, that that was okay with me, and I was relieved Doug didn’t think he had to perhaps do something he didn’t feel up for to meet my expectations. Problem solved!  I now knew that moose weren’t necessarily a sure thing every trip, but the lasting memory was the important harvest on this trip.

We all slept hard that night, and I was a little creaky getting up late the next morning. Thursday was the first of the games for the week of the NCAA basketball tournament. I watched games on my phone til the afternoon, when Doug proposed we go ptarmigan hunting, and away we went. We hunted within sight of town. It was a sunny day with light wind. There were lots of birds. I asked Doug how close I should get before stopping to shoot the .22, and he said I’d get a feel for it. At the beginning, I was shooting at over 50 yards I’d guess. I’d see the shots hitting short in the snow and then try to hold over high to adjust. I got a bird or two, but boy, did I miss alot. As the day went on, I found I was able to get closer before I shot, just like he said. When we had about 10 birds altogether, we headed home. As we cleaned the birds, I showed Doug a technique I’d learned long ago to clean grouse, and he was eager to learn. I’m not sure who taught it to me, but I suspect it was someone in college in Fairbanks. The bird is placed on its back, with it’s head away from you. You place one foot on each wing, your foot on the wing right where it meets the body. Then you pull very, very slowly upward with a leg in each of your hands until the breast separates from the rest for the carcass. It’s one of those things where once you get it, you get it. Doug made smoked Yukon sockeye salmon patties for dinner, and again, simple and excellent.

Day 5 was similar. I slept in, watched some basketball, then Doug said let’s go pull his trapline before he can’t get to it again if the snow melts. We headed out onto the Kuskokwim River and soon saw 2 cow/calf pairs of moose. Right out in the middle of the river, in front of town. I think there will be a winter hunt here next year, as the moose population is starting to boom on the Kusko like it already has on the Yukon. We headed upriver on good ice, but I was wary after the water on the Yukon so stayed well behind Doug in case he found overflow.

We crossed the Kusko and went a few miles upriver, then veered off to a feeder creek. As we weaved our way up, I saw what might be a beaver pond, and Doug pointed out some lynx tracks. Another hundred yards and Doug had stopped. He had a gleam in his eye, which for a Bue is like jumping up and down and screaming for the rest of us. He pointed under a tree. As I got up to him, and shut off my machine I saw it: a lynx. A very much alive lynx. Doug told me to go grab it by the scruff of the neck and we’d take care of it.  Like hell I would. This was the first lynx I’d seen up close. The only others I’d seen were along the Highway out of Haines at night along the road. The huge eyes for seeing at night. The thick coat of fur to keep warm. The big black hair tuft antennae on each ear. The huge padded snowshoe feet. A predator precisely adapted to this environment. Wow. Doug pulled the rest of his traps and his snares and we returned home.

Doug cooked the ptarmigan for dinner. He first boiled the ptarmigan until the meat fell off the bones of the breasts and legs. He stripped the meat off the bones, then added chicken stock and a little corn starch. This he served over mashed potatoes. Again, simple and delicious. This is the best tasting grouse or ptarmigan meal I’ve had.

Day 6 was more wind and snow with temps in the 30’s. We went ptarmigan hunting in the afternoon. The wind seemed to make the birds spooky, and when they flushed, they flew with the wind and went a pretty good distance before they landed again. We each got a bird, which Doug said was how many Marie wanted, and returned home in the sleet and wind. Dinner was muskox burgers and spaghetti noodles. Simple and delicious. We saw more snowshoe hares in the yard, and I though about how the hares, ptarmigan and lynx all had similar snowshoe feet to move in the snow.

We went over to the Fairbanks’ after dinner. I don’t know the exact lineage, but it’s the same Fairbanks family that Fairbanks, Alaska is named after.  Their daughter is a good friend of my niece from nursing school, and Doug and Val are like aunt and uncle to her kids. Really a treat to listen to stories of rural Alaskans and their families and life experiences.

I headed home the next day in a near blizzard. Another trip of a lifetime to Bethel. Somehow, not getting a moose this time made it even more of a story and memorable trip.

My nephews came to Craig for their spring breaks. John is a senior at University of Tampa and will start training as a navy aviator right after he graduates. Kellen is a sophomore at University of Utah, and plays club lacrosse there.

I arrived two days before John was to arrive. Kellen would come 2 days after John. Brian dropped me at our place. I opened the container, then jumped in the truck and ran over to Hollis. One of my niece’s classmates is a crab fisherman, and I saw on his facebook page that he was selling dungeness crab at the Hollis dock for $10 each. Where can you buy a live crab for $10?  Yet he makes more money doing that than selling to a processor. Of course, I love that he and his wife (?) sell directly off their boat to his neighbors on Prince of Wales Island and Ketchikan as we did our salmon here in Juneau. I bought 20 crab to take with me to Bethel a few days from now when we go moose hunting. The skipper threw in several extra, as I’d bought shrimp from him before and he knows my inlaws there. This is called “bunya” in Sierra Leone Krio – a little extra to good customers.

I stopped to see my friends Lew and Patty on the way home. They live in Hollis, and Lew got me my job on the north slope. I gave them the rest of the donuts I bought at Black Bear on the way over, to keep me from eating all of them, and Patty looked happy for donuts. We chatted for about an hour. I asked Lew about one of my supervisors on the slope, and he asked if I wanted to read his book. It was not published, but written for a class or therapy, I think. About his time in Vietnam. I read the book that night and finished it the next morning. He went over when he was 18 as a Marine, and saw serious action. He came back after his first tour was up to the US, felt like he didn’t belong, and went back for a second tour. He came out at age 21 or 22, I think. Like most, the war never left him, as you don’t go through that kind of experience without it changing you. John is 22, and I thought about how different their lives were at that age.

When John arrived, we headed out to the big ocean as soon as the weather permitted. The weather was typical windy and rainy March weather, so most of the time it was too rough to fish out there. John caught a nice king salmon, and lost a couple others. We ate on that fish for the rest of the boys stay, as that’s what they said they wanted for dinner each night.

Kellen arrived, and we fished close to town most days. We caught a shaker about half way out to the big ocean, which was as far as we could get that day, and we still payed for in with a lumpy ride home. Ellen had us over for dinner one night for king salmon and turkey turnovers, and he and Brian had fun talking to the boys about their lives and telling them hunting stories.

Each morning, I’d make egg, bacon and cheese sandwiches for lunch in the morning, and the boys would bring their energy drinks and fruit and licorice they’d bought at the store, and me a thermos of coffee. We’d leave at first light at 6 am. We fished areas nearer town because of weather, but with no luck. We took John to the ferry 3 days later, and the weather was so bad we couldn’t even fish at Klawock, where it’s almost always fishable. So, I called the Bay Company, and Chet said he could get my boat in for the 20 hour service on the new engine right today. We dropped the boat there, then saw that the same fishermen I bought crab from in Hollis ended up having extra crab and brought them back to Craig to sell in the grocery parking lot. Kellen called my sister to ask his mom if they wanted crab: they did. So we got 5 of them, and of course he threw in an extra to make 6. We took these back to the house, where I showed Kellen how to clean and steam the crab. I vac packed the halves and put them in the freezer for Kellen to take to his parents.

A 10 foot container I’d bought for a bunkhouse arrived the day before, and I’d asked my friend Markos if I could borrow his forklift to get the container off the truck at our house. He said yes, and tomorrow you can use my trailer to get it to your house, the forklift to take it off the trailer, and my crew will do it all!  Wow. It’s good to have friends. I’ve helped out on Markos’ kelp (and now oyster) farm several times, and enjoyed talking to his lead Thomas, who was heading the oyster operation, on how it was all going out there. They had the container at our lot in an hour.  I returned to town with the boys and got gift certificates at the restaurant and the coffee shop as a thank you to the crew.

What a day. Boat maintenance done. Container offloaded. Crab bought, cooked, packaged and frozen.

It was just me and Kellen for the last two days. We finally got weather that we could get back out to the big ocean, and Kellen got to see one of those iconic Uncle Mark days.

We left from Craig at first light. It’s been a cold March, and the temperature was about freezing. Kellen turned on the magic boat heater… and it didn’t work!  I had him look up the issue on You Tube on his phone, and turns out it was a low voltage issue. I’d have to fix that later. With the clear skies, we hoped once the sun got above the mountains, we’d be warm enough, and we were right. Once the sun was up, we were happy campers in the boat cabin, and would have turned the heater off anyway. We lucked out.

When we got to the bay we fished in, I threw over a flasher with small spoon attached.  Followed by lots of bad words. Uncle Mark forgot to attach the flasher to the fishing line from the rod. Goodbye twenty dollars.

We fished our way out of the bay, where it was a little lumpy, to the channel, where there was about a 10 foot swell. I was fishing into the swell, and when it came time to turn, I waited till we were at the bottom of the trough, then turned quickly back the direction we just came so as not to take the swell on the beam. When I saw the port downrigger line jump I thought: oh no. Then the engine quit and I thought: oh no… I’d wrapped the wire in the prop. Out in this big swell. Bad words were spoken. I had Kellen pull in the rest of the gear while I tried unwinding the wire from the prop by hand with a pike pole. No dice. It was wrapped tight. More bad words were spoken. Kellen was getting an earful of Uncle Mark yelling at himself.

I put the kicker down and prayed it would start. After a little coaxing, it did. We were able to make our way back into the bay and out of the big swell. I took us behind an island and hoped it was quiet enough there that the two of us could get the boat to the beach, jump out, turn it stern to the beach, and allow me to get the wire off. I found a spot, and I jumped off. Then Kellen jumped off. While he held the bow and stern lines to the boat, I worked on getting the prop off. The hardest part is always getting the cotter pin out, but I managed to get it out, and the prop nut off. The wire slid right off the prop, and I piled it the wire in the back of the boat. I quickly put the prop back on, followed by prop nut. The cotter pin was extra hard to get back on with the boat jumping up and down, despite Kellen hanging on. Eventually I got the pin through the prop shaft and prop nut enough to bend back one side of it to secure the prop nut, and we were back in business. I actually bought a prop guard to prevent this wire wrap issue, which John brought with him, but just never took the time to put it on!

We motored back out in the bay, I respooled the wire onto the downrigger, and put the gear back down. I was so relieved to be back fishing I lost focus, went over a pinnacle that came up to 20 feet, and broke off a cannon ball.  Good bye fifty bucks. More bad words.

I had a spare eight pound cannon ball, but the eye had rusted off. We searched the boat looking to make something to make it work. I ended up putting the ball in a fish glove, then tying the fish glove to the downrigger wire. Worked like a dream.

We stayed in the bay now, having wised up from the wire in the prop. Kev was also fishing in his skiff, and was staying out in the channel, so I figured he was catching out there in the slop. I never could raise him on the radio to find out. Even in the bay, it was a little lumpy, but not uncomfortable.

About an hour later, we got a fish on. On the glove wire!  Kellen got it near the boat pretty quickly, and I thought it was a shaker. Then it took off, and Kellen struggled to keep the fish out of the prop. I had him hand me the rod. I swung the line up and over the top of the roof of the boat cabin to the other side of the boat, then handed the rod back to Kellen. Now the boat was blowing us to the fish. Kellen thought he lost it as I said to reel, reel, reel!  When I saw the rod bend over again, I knew he hadn’t lost it. Then Kellen realized it as well. He was back to his business while I worked to get the downrigger wires and the other line in. Kellen was calm getting the fish to the boat, despite his Uncle’s unbridled excitement and flurry of advice. When I netted the fish I thought: that’s no shaker. A nice king. I stunned the fish and had Kellen fill a bucket with sea water. As I slid the fish head first into the bucket, I broke a gill to bleed it.

On the next pass, the starbard line got back over something in the outboard. It didn’t wrap in the prop, but maybe got into the dolfin above the prop, or maybe the trim tab. I was able to get to the line behind the boat, and pull in the flasher and lure by hand, then cut the line. The line now came back through whatever it was caught on and back to the rod.  I was worried a bit that I’d nicked the line, so I cut a bunch off before retying the terminal gear back on.

An hour later, we got another fish on that line. Kellen played it to the boat, and it turned out to be just undersized. I removed the hook, laid the rod down with the terminal gear over the side, and put the fish back into the water in the net. I let the fish revive until it swam from the net. When Kellen went to reset the line, the terminal gear was gone!  Somehow it hadn’t parted when the fish was on, but must have been nicked and parted when the flasher was dragging at the surface. More bad words……Goodbye 20 bucks.

We fished another couple hours and only caught a little bomber rockfish. We headed home about 2 pm.

The wind was behind us on the way home, so a nice ride. When we got off of St John’s island, some humpback whales spouted, and we stopped to watch them for awhile.  Then back to dock and on to the house.

Kellen said king salmon for dinner again. The boys were easy to cook for.

The next day, we were up early to get Kellen to the ferry in Hollis for his ride over to Ketchikan. On his way to Craig, his flight was delayed from Seattle, and he had to overnight in Ketchikan when he missed his flight from there to Klawock. Now his flight from Ketchikan to Seattle was delayed, and by the time he got to Seattle, he’d missed his flight to Salt Lake City. The airline put him up in a hotel and he made it back the next day. We’d packed the frozen crab inside his clothes in his suitcase, and it made it home all good, the clothes having insulated the crab well.

I was leaving the next day. There was left over crab, potatoes, red onion, butter, and baby romaine for dinner. I put in the rest of the butter, sauteed the onions, then put in the already cooked potatoes and crab, and lastly the romaine. When it was all hot, I dished it onto a plate, poured over the last of the homemade salad dressing, and sat down to eat. I’ve had some of the best meals out of that electric frying pan, and a million dollar view from our container cabin that makes it taste all the better. A great week with the nephews.

Paul’s daughters, with help from the rest of us, put on a great memorial for Paul. It was held at the Moose Club in Petersburg. At Paul’s request. It was his go to place to take people for dinner. And where he participated in sports’ pools for decades. The place was packed.

Kris gave a long biography of Paul’s life. I think everyone there learned something they didn’t know about Paul. I didn’t know Paul had been on the city council at one time. There were lots of pictures of Paul on tables, and many of the model airplanes he made in his lifelong hobby hung from the ceiling.

His grandson told a funny story about bugging his grandpa all day on the boat about seal bombs, and at the end of the day, Paul finally relented and uncharacteristically handed his grandson a lit seal bomb!  The grandson retreated to the back deck and threw it off the boat before it blew his fingers off.

I met Paul on the road from Freetown to Bo in Sierra Leone in about 1987. His daughter Nina had arrived as a Peace Corps volunteer a year before me from Georgetown, where she attended college with Patrick Ewing. She worked in a coastal village introducing improved fish smokers, if I remember correctly.

I had just graduated from UAF, and, on the advice of another mentor, Don Jackson, I joined the Peace Corps to work as a fish farming extension agent. Paul and Nevette were over visiting Nina and I just happened to meet them on the road. This was before I met Sara or lived in this part of Alaska.

Years later, I would meet and marry Sara when I moved to Juneau. Sara, it turns out, had been friends with Nevette since they were in high school. Paul came up to me at a troller meeting in Petersburg when I was there working for ADFG in about 1997. It was the first time I’d seen him since we met in Africa.  That started a friendship that grew stronger every year till he passed away this past Aug 1.

Paul and his best friend Tyler duck hunted together for decades. Paul was very secretive about just where they went down the channel from the house. So much of that trip was tradition and culture between the two of them. I knew I was “in” when I got invited on my first of several duck hunts with Paul.

Their duck blind was a large tree that had, I assume, come down the Stikine River. Paul said the tree had been there since he first came there duck hunting – so likely the late 1960’s or early 1970’s. The saltwater had preserved it well.

You had to get to the island as the tide was flooding, and be sure you left before the tide had fully ebbed, or you might be there another tide cycle before you had enough water to get home or back to the Forest Service cabin. We beached the boat on the shoreline opposite the tree, then hauled in more shells then we’d ever shoot in a weekend. Then the beer.

Paul tossed out decoys onto the mud flat in front of the log blind at shooting distance. When the tide came in far enough, it would float the decoys, and then the ducks should start flying in to them.

Paul then told me he hoped I didn’t mind, but since we had to wait for the tide, he and Tyler liked to enjoy a beer waiting for the ducks. Sounds good to me, I said. Then he said we also like to listen to the Seahawks game (it was a Sunday) that was carried by the local Christian radio station, as it didn’t seem to bother the ducks.  I told Paul I thought maybe we were Siamese twins separated at birth!

Paul sat at one end of the log, and Tyler at the other in the root wad.  They had me a short distance from Tyler is some other sort of woody cover. I’d hear Paul yell down to Tyler asking if the game was on yet, and Tyler would yell back, “No Paul, it’s time to pray!”. That was the beginning, really, of a lifelong relationship.

From that point on, the phone calls between us became more frequent. In the last decade, they were weekly and more. I started going down to Petersburg for every Super Bowl, and we were joined by Kris, Steve, and Dick – and Tyler when he was in town. All now my friends, too. In later years, I also went down for the college football championships, and maybe a college basketball final.

The night before Paul’s memorial, Sara helped Nevette and Nina and Andrew and Peter put on a meal for several dozen people who gathered at the family house on arrival from out of town for the celebration. King and coho salmon from Petersburg, moose sausage, Portugal seafood tins, and imported cheeses from us, and baked goodies for desert from the in-towners that joined us.

The family house has become one of the most familiar houses I know now, having spent so much time there over the past decades. I always feel at home there, and glad the girls are hanging on to it.

After Paul’s celebration at the Moose, we again gathered that evening at Paul’s house, with left overs from the night before and left overs from the Moose Club. Most of the wine and booze was taken care of as well.

The next morning, Steve rode his ebike to the house, and he and I went up to the Petersburg landfill for scavenge day. We got there shortly after opening at 9 am, and one guy who had got there before us was busy taking part an electric box of some kind. A fresh 4 inches of snow overnight covered everything, making it a little difficult to see just what was there.

I wasn’t looking for anything in particular. The last time I was there, I was looking for seine netting, which I found right away in a recycle tote designated for fish netting. Then Steve helped me get some beautiful aluminum plate that now serve as the bases for the downriggers and pole holders on the tug. I also gathered hundreds of dollars worth of stainless steel nuts and bolts and washers.

On this morning, I spotted some kind of structure that may have been an antenna tower, all taken apart and in a bundle. There were multiple heavy wires with loops crimped in both ends that were stays to hold the tower in place. Each end was attached to a pad eye with a stainless steel quick link. I tried loosening one of the links by hand, and it backed right off. Soon, Steve and I were busy removing every link on the pile of antenna tower. We got 37 of them in the end, worth about $300 or more at the hardware store. Steve took some lengths of the wiring and a couple links to use on Paul’s boat, and that’s all he wanted. I took the rest of the links home with me to Juneau. They will come in handy on the boat or for pulling logs down the hill if I can keep track of them, which is always an issue with a hoarder.

We got back to the house from the dump at 1030 am, and people were gathered for coffee and pastries. Most of us were on the 1 pm flight north to Juneau and beyond. An hour later, we started to filter out to drive the short distance to the airport and fly to Juneau on a beautiful crisp sunny winter day.

Paul would be happy with his weekend.

A mutual friend of my nieces’ cousin called on the cousin’s suggestion. I know the mutual friend just casually through trapping correspondence, and remember he told me his sister lived in Madagascar when I was planning my work trip there.

His two boats were dead for now, and he needed to go out and check his trapline. I’d told him years ago if he ever needed someone to go along, I wanted to go to see what dryland trapping for big furbearers was all about. Did I want to take him in my boat tomorrow?  You bet, I said.

The hour was late – approaching 10 pm – as he’d already tried asking a dozen other friends, and only came to me when the cousin suggested it. Normally, I’d like to leave early on such a trip, but the boat hadn’t been out of it’s stall in over a month, and I didn’t recall just how much fuel I had. So, I told him to meet me at 8 am, in case we needed to stop at the fuel dock.

We left at 8 am, as tanks were nearly full. It’s a 3 hour ride over to the mainland where his traps are in my 6 knot boat. It was a fine winter day, with some blue patches of sky and almost calm seas.

I put him off into the punt to row ashore at his first beach trapline. I was having issues again with my charging system on the boat, so ran offshore a bit, killed the engine, and changed the V Belt. That seemed to help, and I could tell now that the other belt was stretched out, so maybe not working just right. I wasn’t sure how long he’d be, and so I dallied around the boat putting things away and such. With nothing else to do, I put out my fishing gear to see if there were any king salmon around. I fished up and down the shoreline. No action, and nothing showed for feed on the sounder.

About 2 hours after I dropped him off, I saw him come down to the beach for a spell, and eventually to the punt. He radioed that he’d row down the beach to the point, check his traps there, and be done in about 20 minutes.

The 20 minutes turned into an hour. Eventually, I saw him coming through thigh deep snow through the trees behind the beach. He would pull something out of my view towards him, trudge a few steps more in the deep snow, and pull it towards him again. When he got almost to the waterline of the snow I could see it: he’d caught a wolf. A big wolf.

He pulled the punt down to the waterline, loaded his trapping gear, then dragged the wolf to the boat and rolled it in. Out he rowed. The wolf was massive. The largest I’d seen in person. The only other wolves I’d seen were on Prince of Wales Island, and they are smaller and leaner. This wolf looked all of 75 lbs, with huge feet. I can only imagine how impressive the 100+ lbs wolves are up in Alaska’s Interior. My friend also caught 3 marten – two of which were almost jet black in color. Much darker fur than those I’d caught on Admiralty Island or down by Craig.

We motored to the second beach, and repeated the process. My friend rowed to shore, and I fished. Nothing showing for feed on the sounder along this beach either, nor any birds working. This check was shorter, and produced one marten.

I dropped him at a third beach. I almost wasn’t going to fish here since I’d seen nothing at the other two spots, but there were a few gulls on the water. They weren’t diving on feed or anything, but looked like they were there for a reason. I put the gear out – I put 50 feet of wire out and fished in about 60 feet of water. I fished out of the little cove past the point where the beach turned north, then turned back into the cove. There seemed to be some feed on the sounder here and there. And then it happened. I looked back like I had all day, and this time the rod was bouncing up and down. I immediately thought I was in too shallow of water, but the sounder showed I was not. I put the boat in neutral, and ran back and grabbed the rod. The fish was taking drag. A few more runs, and I thought it was a keeper for sure.

When I got the line tight, I cranked up the down rigger wire the line had been attached to. Then stepped over the wolf on the deck to the other rod and down rigger. I managed to get both of them up and out of the way, playing the fish as necessary in between.

I got the landing net under the fish, and the king salmon was on board. I stunned the fish, removed the hook, broke a gill, and slid the fish carefully into a bucket of seawater to bleed.

It was almost dark now, but I put the gear back out and made a pass where I caught the fish. When I didn’t hook another, I cranked all the gear up, as it was now dark. My friend was soon rowing out, the twinkle of his head lamp moving to the rhythm of the oars. We got him on board and the punt secured for the run home. He caught nothing in his traps on this beach.

Two hours later, we neared the harbor, and  stopped at his last beach. He had a couple otter sets here, but neither connected.

We got back to the harbor, long after dark, about 9 pm.

As I tied up, I thought: I’m never leaving this place.